top of page

How to Fix a Running Toilet: Handyman's DIY Guide



Introduction: A running toilet can be frustrating and wasteful, leading to higher water bills and potential damage to your bathroom. Fortunately, with a little know-how and some basic tools, you can easily fix a running toilet on your own. In this handyman's DIY guide, we will walk you through the essential steps to troubleshoot and repair a running toilet. If you prefer professional assistance, RentaTech is here to help. With 69 locations [1], you can explore our services and book now for a consultation or repair. Moreover, if you're interested in becoming a tech yourself, RentaTech offers opportunities to get started for as little as $19.99 [3]. Let's get started with fixing your running toilet.

Step 1: Identify the Problem: A running toilet can have various causes, such as a faulty flapper valve, a defective fill valve, or a loose chain. Start by removing the toilet tank lid and observe the components inside. Check if the flapper valve is sealing properly and inspect the fill valve for any leaks or malfunctions.

Step 2: Adjust the Flapper Valve: If the flapper valve is not sealing tightly, it can cause water to continuously flow into the toilet bowl. Adjust the chain length or replace the flapper valve if it is worn or damaged. Ensure the flapper valve closes completely after each flush to prevent water wastage.

Step 3: Check the Fill Valve: The fill valve controls the water level in the toilet tank. If it is defective or not adjusted correctly, it can lead to a running toilet. Adjust the float arm or replace the fill valve if necessary. Ensure the water level in the tank reaches the appropriate mark specified by the manufacturer.

Step 4: Inspect the Overflow Tube and Flush Handle: The overflow tube prevents the toilet tank from overflowing. Ensure it is not obstructed or damaged. Additionally, check the flush handle for any looseness or misalignment. Tighten or adjust the handle if needed to ensure it properly activates the flushing mechanism.

Step 5: Test and Make Final Adjustments: After making the necessary repairs or adjustments, turn on the water supply to the toilet and let the tank fill. Flush the toilet and observe if the running issue is resolved. Make any final adjustments if needed to ensure proper flushing and water flow.

Conclusion: Fixing a running toilet doesn't have to be a daunting task. By following this handyman's DIY guide, you can troubleshoot and repair the issue yourself. However, if you prefer professional assistance, RentaTech is always available. With 69 locations [1], you can easily explore our services and book now for a consultation or repair. Additionally, if you're interested in becoming a handyman yourself, RentaTech offers opportunities to get started for as little as $19.99 [3]. Don't let a running toilet waste water and money—take action and enjoy a fully functional bathroom.


References: [1] RentaTech - Book Now | Rent A Tech: Earth Care: https://www.rentatech.org/booknow [3] Faq | Rent A Tech: https://www.rentatech.org/questions

2 views0 comments

Comentarios


bottom of page