Earth care contractors offer top rated 24/7/365 local service at no extra cost. Visit us as https://www.earthcarebrands.com/ To learn more
For best signaling, place your router in a central, elevated location away from concrete/brick walls, electronics, water and microwaves.
These days, a strong Wi-Fi signal is expected throughout the home at all times, but not always guaranteed. You might be surprised to find that the problem may not be with your ISP or device, but rather the location of your Wi-Fi router.
Your Connection Internet is as fast as it should be. be ?
Take a quick speed test to see if you're getting the speed you're paying for.
Check your speed
Tips on where to place your Wi-Fi Router
So you don't have to be an expert in rockets or a physicist to find the best place to place your router; However, understanding a little how walls, microwaves, water, etc. can affect signal strength can give you better Wi-Fi performance. Here are some things you can do to optimize your Wi-Fi experience.
1. Place the router in a central location
The router sends signals in all directions, so placing it in a central location eliminates distance from any device in your home and you can get a better connection.
Put it in a corner and all you do is send part of your connection to an area of your house and the other part outside. If you live in a two story house, place the router closer to the ceiling on the first floor or closer to the floor on the second level to allow for the best coverage.
2. Do not place the router near a microwave oven or other electronic equipment
Since items such as microwave ovens , cordless phones, Bluetooth headsets, LCD monitors and some baby monitors operate on the 2.4 GHz band, just like your router, they will no doubt operate by interfering with the signal.
Move the router as far away from these devices as possible without completely losing the Wi-Fi connection.
3. Stay away from concrete or brick walls
Whenever the router and the device need to communicate and there is a load-bearing wall between them, the signal is likely to be weak. A Wi-Fi repeater or a mesh network can help solve this problem.
Place the router on a high shelf
Routers send the signal downward, so the higher you place the router, the better.
5. Adjust the angle of the antennas
If you have more than one antenna, adjust them so that they are not all facing the same direction. Try placing them in a mix of horizontal and vertical positions. If you live in a two-story house, angle the antennas parallel to the ground.
Sometimes the antennas are inside the router, so you just need to rotate the router to get the same thing.
6. Avoid water
Do you have an aquarium? Wireless signals can't travel through water, so don't try to hide your router behind all those pretty fish.
Keep the orientation intact
Use the orientation the router is designed for. If it is meant to be placed horizontally, do not place it vertically and vice versa.
8. Beware of windows
While windows don't obstruct your Wi-Fi connection much, they do open up the signal to neighbors, further obstructing Band 2 .4GHz.
Don't take our word for it, give it to a physicist!
Finding the optimal location to place your router doesn't require rocket science, but physics and math can be used to calculate and locate the ideal location for you. Luckily, for the most part, there's an app that can help you figure out the location of your router mathematically so you don't need a fancy calculator or in-depth knowledge of electromagnetic waves.
Image Credit: Jason Cole
Interested in how physics works? Jason Cole, a London physicist turned software engineer, used the Helmholtz equation and an architectural layout of his apartment to map the refractive index to find the best place to place his router. p>
The result? Fixing his router "right in the middle of the apartment" gave the best distribution of signal strength.
Consider upgrading your Wi-Fi equipment
It is crucial that you have the correct Wi-Fi-Router for the size of your home, which could mean the buying a new router. If you live in a small apartment or house up to 1500 square feet, choose a router that supports 802.11ac (also known as Wi-Fi 5) and runs on 2.
4 GHz and 5 GHz bands. For multi-level homes or families with larger square footage, consider a Wi-Fi repeater or next-gen Wi-Fi 6 to get coverage in every room and floor.
Please also note that a technician may install the router near a wall during a professional installation. In theory, this is a good thing because it gets the router out of your way. But the truth is that the wall gets in the way of the router and becomes an obstacle to the signal range.
Optimization goes beyond the router
Your Wi-Fi router is just one factor in getting the most out of your experience Internet. To make sure you have the best Internet or Wi-Fi plans for your needs, count on us for easy-to-use comparison data covering price, service, speed, and more. Follow us on Facebook and Twitter or bookmark our resource center for a first look.