top of page

hide cables like a experienced local handyman

Earth care contractors offer top rated 24/7/365 local service at no extra cost. Visit us as To learn more

How do I mount a TV on the wall without the wires showing?

What should be considered before mounting a TV to hide the wires?

Will you be running the wires for inside the wall or over a wall?

Running the cables inside the wall is much more complicated than running the cables over the wall.

Feeding cables inside the wall requires precise measurements, the right tools, and cutting perfect holes from the back of the TV to the electrical outlet.

By contrast, hiding cables without cutting the wall simply means using plastic rails and covers or hiding them behind furniture or under carpeting.

Simple methods take much less work and cost less. However, they may not completely hide the cables from the TV.

What are all the input/output positions for your TV's electronics?

Although it may seem obvious, the number of entry and exit positions will affect how you hide cables.

> The more wired connections you need, the more cables you'll have to hide.

These entry and exit positions can be caused by the number of speakers used, the projectors or the connection of the home theater to other rooms.

For example, if the projector is located far from your mounted TV, you will need to route cables and cables with multiple entry-exit points.

Also, if you have wired connections in another room, you must ensure that the rooms share the same wall when running cables inside the walls.

In what position and how high do you plan to mount the TV?

Where you plan to mount the TV will affect how easily the TV cables can be concealed.

For example, if you mount your TV high up in a corner, you'll probably be able to hide the cables better in the ceiling.

What type of TV mount will you be using?

There are three main types of TV wall mounts: fixed TV wall mounts, tilting TV wall mounts, and full motion TV wall mounts.

Generally, cable management is easier if you want to hide the cables with all kinds of full motion TV wall mount brackets when you select one with cable management. cables already in the design.

These brackets will have an arm where you can place the clips on the cable for concealment.

However, the downside of a full motion mount is that some wires may not be completely hidden.

Indeed, when you extend the TV outwards, you can see the cables along the arm from the side view.

Cables in the back of a Sanus Long Extension Bracket

Considerations when routing cables inside walls Floors or ceilings


First, you should check your local building code to make sure that you are able to install low voltage wiring as a homeowner. This includes cables such as speaker cables, computer network cables and telephone lines.

Generally this is fine as the risk is minimal with DIY cables and speaker cables.

In addition, you will need to ensure that you have enough space and access to properly route the cables through the floors or the ceiling of the walls. There are pins in the wall, so you need to use a pin finder to locate those pins.

You won't be able to mount the TV or run cables through where the pins are without making a hole.

Do you have the tools to do it?

This method of hiding cables won't work if you don't have the tools to do the job.

You will need advanced tools like a pin finder or multiple wall reader to make sure you don't puncture an existing cable.

And there are other tools you can use need a tape measure, hole saw and wire cutters and connectors.

If you are going to run conduit or rail, you will need a hacksaw or miter saw to cut the plastic.

Is it worth hiding the cables?

Are there many? which is used to pass the cables through the floor or the ceiling of your wall.

This DIY activity requires all the right tools, building code control, and your accessibility.

You could possibly end up drilling holes in the wrong places in your walls if your pilot holes are not working to be in the right place.

That's why I advise you to drill small ice ax holes first so that you only have a small hole to cover with plaster or putty if you get the wrong location, the big ones holes will require new drywall.

The back of an extendable TV cabinet showing the cables

Running the cables inside the floor or ceiling of the wall?

Installing a wall/floor cable grommet

One way to hide the cables on a mounted TV is to use a wall seal kit.

Tools and materials you need:

Drill and bits

Tape measure



Electrical tape or string

Saw correct size bell or hole saw.

Rope and fishing weights

Echo gear in the wall ducts cable management system installed in plywood 1kpx LW

Step procedure -step

Switch off Then use a pin finder to find an open area in the wall cavity between the pins.

Drill a small pilot hole where the bushing position will be. Check if there are any obstacles.

If the location looks good, cut the hole in the wall to the correct size for the grommet fittings and insert the fittings.

Go to the basement or attic if you have access to it and drill a hole in the wall plates where the cables need to go.

Use a rope or fishing line, with a weight to thread the cables through the opening in the wall until the wires do not reach the other end.

Connect the cables to the chain and run each of them through the path you created.

Strip the cables and run the ends of your electronic devices.

Installing a wall outlet kit

Follow the instructions for using a wall outlet kit to hide cables from a wall-mounted TV. The kit should come with a plastic tube, connected sockets, a long extension cord, a cover and a jigsaw.

Hiding cables in the wall provides the cleanest and tidiest look of all possible concealment methods.

Tools and materials needed:

Recessed socket kit (also known as "Power cord and flush mount kit")

Socket boxes

A hole saw

A cordless drill

> Screws

Data com 50 3323 WH KIT In top plate wall socket kit with wires 1kpx LW

Step by step procedure

Once mounting bracket of the wall-mounted TV, mark where the two holes go so that the bottom of the cable outlet is close to any existing wall sockets and where you need it and the top is directly behind the TV.

Use a hole saw to drill these holes before mounting the outlet box.

Fix the socket to the wall using screws.

If you are running a pipe through the walls to make your life easier when new cables are inserted in the future, push the pipe through the top hole.

Route the cables through the tube and out of the hole at the bottom. Then connect the ends on the back of the TV to the decoder and the wall.

Ways to hide cables without running them inside the walls

Run speaker cables under the carpet at the edges of the walls


A Sneaky and inexpensive way to hang a TV without the wires showing is to tuck the cables under the carpet.

Be sure to tuck the cables under the carpet near the edges of the wall, so they can be tucked away without anyone getting up and damaging the plastic shroud or noticing a dent in the floor.

Place cables under furniture to hide them

Use zip ties and hide cables behind furniture

You can use your furniture to hide cables for a wall-mounted TV without drilling.

Dangling cables are frustrating and messy, but you can easily anchor cables behind the outline of your furniture. You can use the control cable clips on the rear edges of the furniture.

Press the clips down and use the twist ties to wrap the wires together so everything is more organized.

Clips can also be used to hold wire harnesses in place. An alternative is to use black tape.

Use cable tunnel or connectors for rails and elbow fittings.

Use cable tunnels to hang the TV on the wall without the wires showing. Grommets or plastic rails act as a cable organizer and cover that attaches to the wall directly above or to the baseboard, but really can go anywhere.

Installing a wall-mounted cable tray

Here's how to hang a TV without visible wires using a wall-mounted cable tray:

Tools and materials needed :

Tape measure

Cable cover kit (including cable tunnel or plastic rail)


Screws and screwdriver

Echogear TV Cable extinguisher in three steps

Step by step procedure

Measure the wall between the floor and the base of the screen.

This measurement will be the length of the circumference necessary to reach the ground. Then measure the distance needed for the cables to run through the desired outlets.

Use a hacksaw to cut the rail to size.

Follow the manufacturer's instructions to mount the conduit base to the wall. using the screws and how to connect the corner joints.

Insert and lay the TV cables inside the cable channel and snap the grommet cover on top.

Be sure to buy a cable tunnel the same color as the wall so that the track merges together, making the faceplate less visible than hiding the cables. You can spray paint the plastic before installation.

How does your system determine cable entry and exit locations?

The location of your home audio speakers

The location of home audio speakers plays an important role in how you hide audio cables. If the speakers are near your audio cabinet, it will be easier to hide all the cables in one place.

But a better home audio system moves the speakers further apart for better surround sound quality if the speakers are on opposite sides of the room you should follow this guide on how to hide the cables.

Think about other electronic devices that will connect to your TV

There are many other electronic devices that you can connect to your TV besides speakers and set-top box. This includes game consoles, laptops, and set-top boxes such as Google Chromecast, Amazon FireTV Stick, Apple TV, Roku, etc.

Hardware for mounting your TV

Fixed TV wall mount

Fixed TV wall mount makes it easy to DIY when hiding cables, especially when feeding cables to the wall. inside the wall. There is no extendable arm, which can show cables.

If you want to hide the cables outside the wall for a fixed amount, you will probably only be able to use a cable tunnel.

Extendable TV Wall Mount

Extendable TV wall mounts are similar, but cables can still be exposed if you extend the arm of the TV forward visible from the side view, although this is not a problem if the mount has a cable or bundles the cables with cable ties.

Some extendable TV wall mounts come with cable management solutions such as cable ties to align perfectly with the extendable arm. Other times, extension arms may include small cable holders that can hold the wires to the arm.

We recommend purchasing these clips if they are not included with the mount you think is best.

Corner TV Stand

The main distinction is that your TV is mounted on both sides of the wall with a corner TV stand.

If you hide the cables inside the wall, we recommend that you route the ends through the same wall as the wall outlet so that you do not have to route the cables through the prongs in the wall. 'angle.

Retractable TV Stand with Fireplace

The tricky thing about the pull out TV stand with fireplace is that you don't want the TV cables near your beautiful fireplace. The best solution is to run the wires through the wall. However, some retractable fireplace TV stands allow cables to be wrapped around the stand for easy concealment.

Additionally, if you lower a TV just above the fireplace, you can hide the cables above the fireplace ledge without having to go through complicated drilling procedures.

What is Mountyourbox gold standard comforting cables

Follow these steps to follow Mountyourbox gold standard and hide TV cables.

Mount the TV in the best position using the correct type of bracket

Hide the cables inside the wall between the TV and another enclosed area

This is where the a PC. your gear, like a home audio controller and all cables, goes from here to the speakers. (either hidden inside the walls or hidden in a rail).

Stageek cable management kit showing how to manage TV and electronics cables for the theater system

Tips for less cables

One of the best ways to reduce the cable clutter is simply to limit the number of cables needed. Here are some tips to reduce the number of cables:

Use Bluetooth for speaker cables

Buy a Smart TV that connects to the Internet.

Dispose of cables you don't use or need.

Unplug cables when not in use. For example, you may not need multiple HDMI cables connected to your TV at the same time, but you may only have one and a multi-box somewhere else.

Cable Management for Cable TV

Tips for Organizing Cables

Follow these simple tips to better organize cables and make your room neat and tidy: Color all cables and wire stubs to eliminate confusion. Label the cable type based on the cable and the component or media device it connects to.

Use cable ties to eliminate clutter.

Hang the reel on the back of furniture and desks in your entertainment center.

Use hooks to hang electrical cables.

Designate an area inside your home or office to perform all charging operations.

Consolidate your cables and minimize the number of cables you need.

Wires and cables attached to the back of a TV

Safety tips when tinkering and hiding TV cables

Is there a risk in hiding TV cables, especially if you are running cables inside your wall Route all standard electrical cables, such as telephone, computer and speaker cables, away from the wall where you run the TV cables. This prevents electric shocks and reduces interference.

Run cables through interior walls whenever possible, as exterior walls contain insulation and more reinforcement for your home.

Turn off switches inside the electrical box before energizing cables, as this reduces the risk of electric shock if you pierce or cut existing wiring.

Interior Cable Distribution

Ready to Hide the Cables?

After spending lots of money on your beautiful new TV screen and taking the time to fit it perfectly to the wall, the last thing you want to see is a bunch of tangled cables that some people complain about .

Whether you choose to hide the TV cables inside or outside the wall, there are many ways to do it.

Be sure to consider each method we've looked at and how difficult or easy it is given your TV stand type and budget.

0 views0 comments
bottom of page