top of page

bath tub replacement local plumbing tips

I've decided it's time to replace the old leaky tub in your tiny bathroom. This project may be a bit ambitious, but if you follow the steps, you'll be having a great bath in no time. Keep in mind that our tub installation experts at PJ Fitzpatrick are here to help, whenever you need them. Please give us a call and we will be happy to assist you with any bathroom repairs, replacements or renovations you may have. Here's how to replace a tub in a small bathroom:

Follow these steps and learn how to replace a tub in a small bathroom

  1. We strongly recommend that you measure your old tub and draw an accurate plan of the entire bathroom, including plumbing systems such as faucets and drains.

Note the length and width of your tub space. Be sure to mark whether the drain is on the left, right, or center of the tub area. It's easier to move paper things around than to carry heavy bathroom fixtures in a small cramped space.

  • As is often the case with older homes, replacing the tub is good news, bad news. Expect that when you remove the old tub, you will need to level the subfloor before placing the new tub.

Every building, including houses, settles over time. We recommend that you use a spirit level and add mortar, or any material specified by the manufacturer's instructions, and ensure that the floor under your new tub is level and able to support the weight of the new tub. bathtub.

  • The good news is that most bathtubs can be removed from the small bathroom by placing them on their side and transporting them vertically. As you learn how to replace a bathtub in a small bathroom, you may need to recruit a few strong friends to help you with this step.

  • You will probably need to remove the sink and toilet before removing the old tub and inserting the replacement.

This will give you and your crew more room to move around in, and it's something they'll need and really appreciate.

Follow these steps once the new tank is in place

  1. After the new tank is in place, it may be necessary to use shims to s Make sure the flange and drains match the unit. Pro Tip: You can dry fit most of your new tub's plumbing fixtures, including the drain and waste fitting, before attempting to place it. It will be easier if you do most of it before placement.

  2. Secure the drain and place a generous bead of caulk around the perimeter.

Then turn the tap back on.

  • Fill the new tub and check for water leaks. Keep in mind that grout, caulking, or plumber's putty takes 24 hours to fully solidify. It is best to wait until the materials have fully cured before performing the leak test.

  • Reinstall sink and toilet and, if necessary, replace drywall and tile.

Replacing the bathtub gives a whole room a new look

Replacing the bathtub is like solving a puzzle, but it's a job that can be done just as quickly as long as you have patience. What is better? Today's modern bathtubs give you so many options, from acrylic tubs that resist mildew to deep soaking tubs that give you a luxurious treat. Once the project is complete, you can rest assured that you will have a rejuvenated tub that you can enjoy for years to come.

Earth Care Plumbers are available to assist with plumbing emergencies 24/7/365. Just dial 8337368835 Or you can book online at

5 views0 comments


bottom of page